Replacement cheese press spring is designed to use with our spring-loaded presses. It is custom made of stainless steel. When compressed 50% approximately 50 lbs. of weight is being applied. Includes stainless steel washer. Spring size; width 7/8 in(22.2mm), height 1 5/8 inch(41.2mm).
Shipping included within the USA. International shipping available.
Home made set up
Posted by Lucy on 7th Aug 2019
My homemade set up basically consists of two boards two long bolts and a mold. I put a tin can on top of the mold lid and the spring between lid and board and it work great! :)
The best customer service hands down.
Posted by Mark Copeland on 11th Feb 2018
Quality on every level, from the products to unparalleled customer service, I'm so thankful I found this company.
Exactly as advertised
Posted by Katherine Moeller on 20th Oct 2016
This spring does an excellent job of allowing me to gauge the pressure on the cheese. The price is right as well.
great spring how to calibrate
Posted by Frank White on 18th May 2016
I am making a cheese press and the springs were just what I needed. My problem was in how to calibrate the pressure of the spring. I am guessing right now, but would appreciate any suggestions on calibration. But the springs and the delivery time was great. Thanks. From thecheesemaker.com: We had the springs calibrated by the mfg so that if the spring is 50% compressed, it is applying approximately 50 lbs of weight.